Reference Numbers: UM - 18403
Product Details:
Line Output:- Nominal line output for 4,200 mm net film width trimmed on winder mill roll Machine classification:- Throughput:- 300 kg/h Size of flakes:- 6 x 6 mm Thickness of flakes:- according to produced thickness of film and edge trim Conveying speed:- approx. 25 m/sec Table consumers and drives:- Edge Trim film feeding device:- advanced system using 'venturi' principle Fan:- approx. 3,000 m3/h at 8kpa Piping:- Buyers supply approx 40 m(depending on actual layout) Grinder Capacity:- 300 kg/h for continuous operation Screen mesh:- 6mm square hole Flake conveying from grinder to extrusion:- high speed conveying Fan:- 1.900 m3/h at 4.5 k pa Piping:- Buyers supply approx 120 m(depending on actual layout) Feeding Main Extrusion Resin/Air seperation:- cyclone for operation of resin and conveying air Metal separator:- inductive metal detector with ejection Mixing hopper Volume:- 1m3 Drive of mixing screw:- 2.2 KW AC Drive of envelope arm:- 0.2 KW AC Technical Data:- Main Extruder:- BS-PP-225/30 D Barrel:- diameter: 225 mm, L/D=30 Material:- bimetal, extremely wear resistant Feeding zone:- Plain, water cooled Barrel zones:- electrical heated, cooled by fans- 250 KW Flange zone:- electrical heated:- 20 KW Screw Material:- Nitrated steel, optimized for PP Drive:- DC motor:- 600 KW Gearbox:- two step gearbox including two oil pumps:- 2x1,1 Adapters:- Extruder-pump-filter-die Prefilter Design:- Strainer plate Heating capacity:- Electrical heated:- 24 KW Melt Pump:- inline helical gear pump Dosing capacity:371 cm3 per revolution Heating system:- Electrical heated Drive:- AC motor Adapter:- Extruder-pump-filter-die(oil heated) Polymer Filter/Main extrusion:- Long-life filter LLF 12 Filter insert:- consisting of 12 candies, flat screen Filter area:- 1,32 m2 per insert Heating:- Electrically Filter preheating Heating:- electrically:- 40 KW Filter Preheating Heating:- electrically:- 50 KW Co-extruder I:- 1xBS-PP 60/32D Barrel:- diameter 60 mm, L/D=32 Material:- nitrated steel Feeding zone:- grooved, water cooled Barrel zones:- electrical heated, cooled by fans:- Heating:- 18,75 KW, Drive:- 1,85 KW Flange zone:- included in adapter heating:- heating:- 1,5 KW Screw Material:- nitrated steel, optiized for PP Speed :- max. 156 rpm Drive:- AC motor:- 60 KW Gearbox:- two step gearbox incl. oil pump:- 0.75 KW
